7
PROGRAM MODE
Programming Note: If 30 seconds is allowed to pass, or either the “IN” or
the “OUT” buttons are pressed during programming modes the unit will
confirm/set the last information entered—the display will stop flashing and
return to normal time-date readings. If you don’t leave the program
sequence during the programming of sections “A” through “G”, you can
advance to step 4 of the next program section. If you do leave the program
sequence (or want to program a specific setting) follow each instructional
step to program that setting. The programming sequence is as follows:
•
12 or 24 Hour Time Setting
•
Time Zone Setting
•
Daylight Saving Time(DST) Setting
•
Time Setting
•
Day, Date and Year Setting
•
°
F or
°
C Setting
•
LCD Contrast Setting
FUNCTION KEYS
The Secondary Buttons are located directly below the Primary Buttons, and
behind the
La Crosse Technology
shield on the face of the unit. To access
the Secondary Buttons: place a solid object in the slot (above the shield)
and gently pull out and down.
Primary Buttons
Secondary Buttons
