19
1. It is necessary to remove the
batteries from all units currently in
operation.
2. Remove the battery covers to all
RCS units.
3. Place all RCS units in a numeric
sequential order (if more than one
unit is to be installed).
4. In sequential order, install batteries.
5. Install batteries into the Indoor
Temperature Station.
6. Follow the Set-Up Guide for
programming and operating
instructions.
B. VIEWING AND OPERATING WITH
MULTIPLE RCS UNITS
1. To view the outdoor data, press the
IN/OUT
button. If there is more
than one RCS unit in use a squared
in number will appear between the
outdoor temperature and the
humidity.
2. To shift to a different RCS unit (if
more than one is in use) press the
CH/+
button.
3. To view the Minimum/Maximum
temperature: first select which RCS
to read data from, then press the
MIN/MAX/RESET
button. Pressing
this button once will display the
minimum temperature, minimum
humidity, and the date and time the
