4
battery cover to fall away from the
unit. Place the screw partially
back into the hole and angle it
slightly, so the threads grab the
battery cover. With the screw,
pull the battery cover off.
3.
Observing the correct polarity,
install 2 AAA batteries. The
batteries will fit tightly—make
sure they do not spring free, or
start-up problems may occur.
4.
Check the LCD screen of the
Remote Control Sender to see if
there is a temperature reading. If
there is no reading check the
polarity of the batteries or replace
with new batteries.
5.
Observing that the rubber
weather-seal is in place; replace
battery cover, screw, and
mounting bracket.
