5
B.
WEATHER TEMPERATURE STATION
1.
Remove the battery
cover. Pull up and
out from the slot
located
in
the
central position of
the battery cover.
2.
Observing
the
correct
polarity,
install
2
AAA
batteries.
3.
The batteries will fit
tightly
(to
avoid
start-up problems make sure that they do not
spring free during installation).
4.
Replace the battery cover.
5.
To switch between F and C, press the
F/ C button on the back of the unit.
Note:
After the batteries have been installed into
the Weather Temperature Station the LCD
segments should light up. Within 3 minutes, the
Outdoor Temperature should be displayed in the
OUTDOOR LCD. If any of this does not occur,
remove all batteries and install them again
—
carefully observing the polarity.
