La Crosse Technology WS-7014U, Инструкция по эксплуатации

Страница: 10 / 24

10
5. The minute digits should be flashing. Press the CH button to
change the minutes—increasing the minutes by increments of
1 with each press of the
CH button.
6. Press and release the SET button to confirm the minutes and
to advance to the Day, Date, and Year setting mode.
Note: In 12h mode, “PM” will appear to the left of the time
during PM hours. If the time is not within the PM hours, nothing
will be displayed. Be sure to set the time to the correct AM/PM
time to ensure automatic reception at optimal times.
VI. SETTING THE DAY, DATE, AND YEAR
Note: Reception of the WWVB signal will also set the date and
day. The reception of the signal will override any
programmed date and day.
1. Press and hold the SET button for 3 seconds, or until “12 h” or
“24 h” flashes in the DATE LCD.
2. Press and release the SET button 5 more times to reach the
Weekday setting mode.
Note: “MO” (representing Monday) is the default setting for the
weekday, “1.1” is the default setting for the numeric month and
day, and “1999” is the default setting for the year. The day, date,
and year will be automatically set once the WWVB signal is
received. However, the day, date, and year can be manually set
and will flash respectively in the DATE LCD during manual
programming.
3.
The weekday will be flashing in the DATE LCD, press the
CH button to change the weekday.
4. Press and release the SET button to confirm, and to enter the
numeric-month setting mode.
5. The numeric-month will be flashing in the DATE LCD. Use
the
CH button to set to the current month.
6. Press and release the SET button to confirm the numeric-
month, and to enter the numeric-day setting mode.