background image

 

37

Wind sensor 

9.84 x 3.06 x 10.92  inches 

 

23. Warranty 

Information 

 

La Crosse Technology, Ltd provides a 1-year limited warranty on this 
product against manufacturing defects in materials and workmanship. 

 

This limited warranty begins on the original date of purchase, is valid 
only on products purchased and used in North America and only to 
the original purchaser of this product.  To receive warranty service, 
the purchaser must contact La Crosse Technology, Ltd for problem 
determination and service procedures.  Warranty service can only be 
performed by a La Crosse Technology, Ltd authorized service center.  
The original dated bill of sale must be presented upon request as 
proof of purchase to La Crosse Technology, Ltd or La Crosse Tech-
nology, Ltd’s authorized service center. 

 

La Crosse Technology, Ltd will repair or replace this product, at our 
option and at no charge as stipulated herein, with new or recondi-
tioned parts or products if found to be defective during the limited 
warranty period specified above.  All replaced parts and products 
become the property of La Crosse Technology, Ltd and must be re-
turned to La Crosse Technology, Ltd.   

 

Replacement parts and products assume the remaining original war-
ranty, or ninety (90) days, whichever is longer.  La Crosse Technol-
ogy, Ltd will pay all expenses for labor and materials for all repairs 
covered by this warranty.  If necessary repairs are not covered by this 
warranty, or if a product is examined which is not in need or repair, 
you will be charged for the repairs or examination.   

 

The owner must pay any shipping charges incurred in getting your La 
Crosse Technology, Ltd product to a La Crosse Technology, Ltd 
authorized service center.  

 

Your La Crosse Technology, Ltd warranty covers all defects in mate-
rial and workmanship with the following specified exceptions: (1) 
damage caused by accident, unreasonable use or neglect (including 
the lack of reasonable and necessary maintenance); (2) damage 
occurring during shipment (claims must be presented to the carrier); 
(3) damage to, or deterioration of, any accessory or decorative sur-
face; (4) damage resulting from failure to follow instructions contained 
in your owner’s manual; (5) damage resulting from the performance of 
repairs or alterations by someone other than an authorized La Crosse 

 

38

Technology, Ltd authorized service center; (6) units used for other 
than home use (7) applications and uses that this product was not 
intended or (8) the products inability to receive a signal due to any 
source of interference. 

 

This warranty covers only actual defects within the product itself, and 
does not cover the cost of installation or removal from a fixed installa-
tion, normal set-up or adjustments, claims based on misrepresenta-
tion by the seller or performance variations resulting from installation-
related circumstances. 

 

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY 
FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER 
SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR 
MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT TO 
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMA-
TION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF CHIL-
DREN’S REACH. 

 

This warranty gives you specific legal rights.  You may also have 
other rights specific to your State.  Some States do no allow the ex-
clusion of consequential or incidental damages therefore the above 
exclusion of limitation may not apply to you. 
For warranty work, technical support, or information contact:

 

 

La Crosse Technology, Ltd 

2809 Losey Blvd. S. 

La Crosse, WI 54601 

Phone: 608.782.1610 

Fax: 608.796.1020 

 

e-mail: [email protected] 

(warranty work) 

 

[email protected] 

(information on other products) 

 

web: 

 www.lacrossetechnology.com 

 

Question? Instructions? Please visit: 

 www.lacrossetechnology.com/2316 

 

 

 
 

 

39

 
 

FCC DISCLAIMER 
This device complies with part 15 of the FCC rules.  Operation is subject to the 
following two conditions: 

(1)  This device may not cause harmful interference. 
(2)  This device must accept any interference received, including inter-

ference that may cause undesired operation. 

 
 
 
 
 

All rights reserved. This handbook must not be reproduced in any form, even 
in excerpts, or duplicated or processed using electronic, mechanical or chemi-
cal procedures without written permission of the publisher. 

 

This handbook may contain mistakes and printing errors.  The information in 
this handbook is regularly checked and corrections made in the next issue.  
We accept no liability for technical mistakes or printing errors, or their conse-
quences. 
All trademarks and patents are acknowledged. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание WS-2316U











Отзывы: