background image

 

La Crosse Technology, Ltd.  

Page 8 

 

Wind area on the weather station is blank (no dashes or numbers) 

 

  Check that other areas of the weather station read properly.   

  Check 

batteries

 in the weather station.  

  The weather station and wind sensor need testing. 

 

Wind direction shows dashes 

 

  If the speed is working, then the wind transmitter is bad. 

  

Wind direction is incorrect 

 

  Reset Wind Direction. 

  Remove the battery cover (not the batteries) from the wind sensor. 

  Manually point the wind direction vane to the North (use a compass or map if necessary).  

  Press the SET opening located inside battery compartment with a paper clip or similar tool. This will 

set the local wind direction to North.  

 

Only press set once.

 Continued presses of the SET opening, toggles the wind direction between the 

factory defaults preset or manual set direction. 

Note: 

Repeat this procedure every time when changing the batteries. 

  Watch for the next update on the weather station to ensure the direction changed to North. 

 

Wind transmitter is frozen 

 

  Freezing rain and wet snow can clog the wind transmitter and prevent it from reading speed or 

temperature. 

  Bring the transmitter in the house for 2-3 days. The transmitter will need to thaw out and dry out for 

prevent refreezing. 

 

Wind alerts 

 

 

The weather station provides the option to set 

Wind Speed Hi alert

 and 

Wind Gust Hi alert

.

 

 

To set alerts: 

1. 

With the wind icon flashing, press ALARM/CHART button to select the desired alarm. 

2. 

Hold

 the ALARM/CHART button until the wind alert and corresponding icon flash.  

3. 

Set the alert using UP or DOWN arrow button.  

4. 

Press and hold either button for fast digits advance. 

5. 

Press ALARM/CHART button to confirm your selection and return to the wind alert selection 
screen. 

 

To disable alerts: 

1. 

Press the ALARM/CHART button to view the wind alert. 

2. 

Press the UP or DOWN arrow button until the wind alert reads 

OFF.

 

Note:

 The wind speed alert is set at 5 mph default and the wind gust alert is set to 7 mph default to 

prevent false alerts from small fluctuations. 

 

Wind MIN/MAX 

  The weather station records the maximum wind speed and wind gusts collected during the day. Alerts 

for wind speed and wind gust are programmable.  

 

View:

 With the wind icon flashing, press and release the MEMORY button to view: 

 

Current average wind speed 

 

Daily maximum wind speed 

 

Gust speed 

 

Daily maximum gust speed 

 

Reset: 

With the wind icon flashing, 

hold

 the MEMORY button to reset all wind statistics. 

 
 
 

Содержание WS-1517




















Отзывы: