Page 6
Page 5
Page 7
Page 8
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be
installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions
and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or
processed using electronic, mechanical or chemical process without the written permission of the
publisher. This booklet may contain errors or misprints. The information it contains is regularly checked
and corrections are included in subsequent editions. We disclaim any responsibility for any technical
error or printing error, or their consequences. All trademarks and patents are recognized.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google Inc.
WARNING:
This product can expose you to chemicals including styrene, which is known
to the State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov
STATION & SENSOR SPECS
V30/V30v2 / V30-WRTH
LTV-D1
Indoor Temperature Range
32°F to 99°F (0°C to 37°C)
32°F to 122°F (0°C to 50°C)
Indoor Humidity Range
10% to 99%RH
10% to 99%RH
Relative Pressure Range
23.62 to 32.48 InHg
(800 to 1100 hPa)
n/a
Power Requirements
5.0V AC Adapter (included)
1 CR2032 Battery (included)
2 “AAA” Batteries (not included)
The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet
shall be installed near the equipment and shall be easily accessible.
THERMO-HYGRO (LTV-TH2)
• Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Outdoor Humidity Range: 10% to 99%RH
• Power Requirements: 2 “AA” Batteries (not included)
WIND (LTV-W1)
• Wind Speed Range: 0 to 111 MPH (0 to 178 KMH)
• Power Requirements: 2 “C” Batteries (not included)
RAIN (LTV-R3)
• Rainfall Range: 0-393.6 inches (0-9999 mm)
• Power Requirements: 2 “AA” Batteries (not included)
Sensor Transmission Range:
400 Feet (121.92 Meters) open air
WI-FI NETWORK REQUIREMENTS
• Broadcast Frequency: 2.4GHz (802.11 b/g/n)
• Network Name/Password: Must Not Exceed 45 Characters
• Network Speed: Must Be Greater than 1 Mbps
Note:
If you have a multiple band router, be sure your mobile device is connected to the
2.4 GHz frequency when connecting your station to the app.
MOBILE REQUIREMENTS
Apple phones require iOS with Wi-Fi service.
Android phones require
Android OS with Wi-Fi service
LA CROSSE TECHNOLOGY™ PATENTS
Visit
www.lacrossetechnology.com/patents
for patent information.
CARE + MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.
WE’RE HERE TO HELP!
If you require additional support, call our friendly customer support
representatives based out of our office in La Crosse, Wisconsin.
(2830 26th ST S.)
Phone: 1.844.200.8752 Online:
bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
ACCUWEATHER FORECASTS
Other benefits of connecting your station to the La Crosse View™
app include Daily and Hourly Forecasts from AccuWeather. These
will display changes in your station’s Weather Icons, HI/LO Temps,
Wind Direction, and Chance of Precipitation values.
DAILY FORECAST
Press the DAILY button to view predictions for each of the next 7
days of weather data.
HOURLY FORECAST
Press the HOURLY button to view predictions for each of the next
12 hours of forecast data.
Note:
These buttons will not provide a function if your station is not
connected to the La Crosse View app.
STATION ICONS
Wi-Fi Indicator:
Will flash when your station is ready to connect
to the Internet, and be solid on screen when connected.
Internet Indicators:
Will display in areas to indicate data
coming from the Internet.
Low Battery Indicators:
Individual station/sensor indicators will
let you know which batteries to replace.
Sensor Reception Indicators:
Indicate the reception strength
between your sensors and station.
BUTTONS & FUNCTIONS
Buttons located on top of Color Weather Station
Buttons located on side of Color Weather Station
SET
Hold for basic setting. Press to view Wi-Fi status.
TEMP, WIND, RAIN Press to view history.
LIGHT
Press to adjust brightness. Hold to set Auto Dim.
+ or –
Use + or – to adjust values in settings.
+ & –
Hold both buttons to search for Wi-Fi.
SENSOR
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold
MINUS (–) to remove.
DAILY, HOURLY
Press to see forecast. Must be connected to Wi-Fi.
RAIN & LIGHT
Hold both buttons to reset all sensor ID’s and Wi-Fi settings.
EXTRA SENSOR
Press to toggle through “extra sensor” & Barometric Pressure. Hold to
add Sensors.
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship. Before returning this product,
please contact our friendly customer support team with questions
or visit our online support site. Phone: 1.844.200.8752
For Full Warranty Details, Visit:
www.lacrossetechnology.com/support
