2. Remove the protective strip from
one side of the tape. Press firmly
into the designated area on the
back of the mounting bracket.
3. Remove the protective strip from
the other side of the tape, and
position the outdoor
temperature/humidity sensor in
the desired location.
III. MAINTENANCE AND CARE
1. Extreme temperatures, vibrations, and shock
should be avoided to prevent damage to the
units
2. Clean displays and units with a soft, damp cloth.
Do not use solvents or scouring agents, they
may mark the displays and casings
3. Do not submerge in water.
4. Do not subject the units to unnecessary heat or
cold by placing them in the oven or freezer.
5. Opening the casings invalidates the warranty.
Do not try to repair the unit. Contact La Crosse
Technology for repairs.
IV. SPECIFICATIONS
Temperature measuring
range
-21.8ºF to 157.2ºF with
0.1ºF resolution
(-29.9°C to 69.9°C)
Relative Humidity
measuring range
20% to 99% (“—“
displayed when outside
this range)
Transmission interval
Every 10 seconds in first 3
minutes
Every 1 minute thereafter
Transmission frequency
433.92 MHz
Transmission range
80 feet (25m)
Power source
2 x 1.5V AA Battery
Alkaline recommended
Dimensions
4.33” x 1.57” x 0.78”
(110 x 40 x 20mm)
Rain Protector
2.25”Ø x 4.75” high
(57mm
∅
x 120mm high)
V. LIABILITY
DISCLAIMER
1. The manufacturer and supplier cannot accept
any responsibility for any incorrect readings and
any consequences occurring should an
inaccurate reading take place.
2. This product is not to be used for medical
purposes or for public information.
3. The specifications of this product may change
without prior notice
4. This product is not a toy. Keep out of children’s
reach.
5. No part of this manual may be reproduced
without written consent of the manufacturer.
CONTACT INFORMATION
For warranty work, technical support, or information
contact:
La Crosse Technology
2809 Losey Blvd. S.
La Crosse, WI 54601
Phone: 608.782.1610
Fax: 608.796.1020
e-mail:
(warranty work)
(information on other products)
web:
www.lacrossetechnology.com
VI. FCC
DISCLAIMER
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Freq. 433.92 MHz
La Crosse Technology
Made in China
TX4UP
V2
