La Crosse Technology S88907V2, Руководство пользователя

Страница: 11 / 14

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 11
•
Batteries may be overpowered or underpowered. Remove batteries from the weather
station.
•
Press any button 20 times. Leave the weather station unpowered for 1-2 hours.
•
Install fresh Alkaline batteries with correct polarity.
•
If the indoor temperature is still shows dashes, HH.H or LL.L, the weather station may
need replacement.
Inaccurate Indoor Temperature Reading
Explanation: When the indoor temperature is inaccurate, it is often due to the location of
the display or overpowered/under powered batteries. You can test the accuracy at your
home.
Side-by-side test: Bring the remote sensor in the house and place it next to the weather
station for 2 hours.
•
Compare indoor and remote temperature. The temperature should be within 4
degrees to be within tolerance.
•
Look for heat sources such as sunlight, door or window frames or reflected heat or
cold near the weather station.
Check batteries and AC power cord .
Set Time Alarm
In normal mode, hold the ALARM button for three seconds to enter alarm set mode.
1. HOUR: The Hour will flash, use the ▲ or ▼ buttons to set the hour, and press ALARM
button to confirm and switch to minutes.
2. MINUTES: The Minutes will flash, use the ▲ or ▼ buttons to set the minutes, and press
ALARM button to confirm and exit.
Note: When no buttons are pressed for ten seconds, the weather station will save the last
change and default back to normal mode
Activate/Deactivate time alarm
•
In normal mode, press and release the ALARM button once to show alarm time.
• Press and release the ALARM button repeatedly to turn ON/OFF alarm.
• The alarm icon appears when alarm is active.
•
Note: The alarm will ring for 2 minutes then turn off if no buttons are pressed.
Snooze Alarm
•
When the alarm sounds, press the HI/LOW/OFF button to snooze the alarm for 10
minutes.
•
The snooze option can repeat three times.
•
The alarm icon will flash while the snooze feature is active.
•
Note: while the alarm sounds press any button except the ALARM button to turn
the alarm off.