TO TURN ALARM OFF
FOR
24
HRS
WHEN IT IS RINGING
(BOTH ALARM 1 OR 2):
1.
Press the “SNOOZE/24HR AL/
” key to start the desired snooze time or
press and hold until the confirmation tone sounds the “SNOOZE/24HR AL/
”
key to switch the alarm off for 24 hours.
2.
Or, press the “
AL/HR
” key to stop alarm
1
or the “AL/
MIN
” key to stop alarm
2
. This will turn the alarm off for 24 hours.
TO DEACTIVATE ALARM FROM GOING OFF AT ALL:
Alarm 1:
1.
In normal mode display,
press and hold the “
AL/HR
” key. The alarm icon
“AL1” will flash first then after a few seconds the alarm on/off icon “(((1)))” will
disappear indicating that it has now been turned off.
2.
ess
“SNOOZE/
24HR AL
/
Pr
” key to exit the mode
Alarm 2:
1.
In normal mode display,
press and hold the “AL/MIN” key. The alarm icon
“AL2” will flash first then after a few seconds the alarm on/off icon “(((2)))” will
disappear indicating that it has now been turned off.
2.
ess
“SNOOZE/
24HR AL
/
Pr
” key to exit the mode. Date will automatically
be displayed (
providing DCF time signal is revived)
.
TO REACTIVATE THE ALARM SETTING:
Alarm 1:
1.
In normal mode display,
press the “
AL/HR
” key. The alarm icon “AL 1” will
flash
first, then the alarm on/off icon “(((1)))”
will appear indicating that it has
now been turned on.
2.
Press the “SNOOZE/
24HR AL
/
” key to exit this mode.
Alarm 2:
1.
In normal mode display,
press the “AL/MIN” key. The alarm icon “AL 2” will
flash
first, then the alarm on/off icon “(((2)))”
will appear indicating that it has
now been turned on.
2.
Press the “SNOOZE/
24HR AL
/
”
key to exit this mode. Date cannot be
displayed
MANUAL TIME SETTING:
Minutes Setting
(flashing)
Hours Setting (flashing)
In some cases after inserting the battery, the alarm clock may not be able to receive
the DCF-77signal. In this situation, the time should be manually set (before manual
setting see
Checking DCF-77 Reception
above).
