Model: WS-9080U-IT www.lacrossetechnology.com/support
Page | 3
Channel
Indicator
Hold
the
MIN/MAX
button to reset all time/date stamped
MIN/MAX readings.
This reset will not change the daily MIN/MAX readings.
Display Modes (Weekday/day, Month/date, Seconds)
Press the
+
button to change what is displayed next to the time:
Weekday & Day
Month and Date
Seconds
Setup with Multiple Outdoor Sensors
The temperature station can receive up to 3 outdoor transmitters.
Extra TX29U-IT transmitters may be found online or at your retailer.
Additional transmitters allow you to monitor remote temperatures of
up to 3 locations within a 330 Ft wireless range of the temperature
station.
Step 1:
Remove batteries from the temperature station and all
outdoor sensors for 15 minutes.
Step 2:
Insert batteries into the
first
TX29U-IT outdoor sensor.
Observe the correct polarity.
Step 3:
Insert batteries into the temperature station. Observe the
correct polarity.
Step 4:
When outdoor temperature shows on the temperature station,
insert batteries into the
second
TX29U-IT outdoor sensor.
Observe the correct polarity.
Step 5:
When channel 2 shows on the temperature station,
insert
batteries into the
third
TX29U-IT outdoor sensor. Observe
the correct polarity.
Step 6:
Let all sensors sit next to the temperature station for 15
minutes before positioning outside in a shaded location.
Channel Indicator (When multiple outdoors sensors are in use)
Press and release the
CH/-
button to view a different channel. A
shift from one number to the next should be
observed in the OUTDOOR LCD.
Note:
When only one transmitter is connected, you cannot see other
channels and the channel indicator will not show.
