La Crosse Technology, Ltd
Page 2
•
The Projection will operate at three levels of intensity (including OFF) at your discretion
when using the power cable.
•
Settings Backup: Your alarm clock has a capacitor that will keep settings for 6 minutes
in the event it loses power. Time will not display when unplugged.
Alarm Clock Factory Restart
Explanation: The factory restart returns the alarm clock to an “out-of-the-box” state and
often resolves an issue.
Factory Restart: Press the RESET button (next to the USB Charging Port) one time.
12/24-Hour Time Format
•
Use the Settings Menu to select 12 hour or 24 hour time format.
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
•
Tap the SNOOZE/BACKLIGHT button to adjust the backlight 5 levels of intensity.
•
Intensity Levels: 0FF | 1.5% | 20% | 50% | 100%.
LCD Backlight is not on:
Try this exercise in a dim room. The
will operate at five levels of intensity
(including OFF) at your discretion when using the power cable. Touch the
SNOOZE/BACKLIGHT button a few times. Wait 15 seconds to see if backlight stays on.
This will assure it is not in OFF mode.
What is Auto Dim backlight?
You can set your backlight to automatically dim to level 1 at a set hour for sleeping, then
automatically return to full brightness when you wake.
Set Auto Dimming (Hour only).
1.
Hold the SNOOZE/BACKLIGHT button 2 seconds to enter dimmer set mode. Dim off
will show.
2.
Tap the + or – buttons to turn dimmer (ON). Dim at will show for 2 seconds then 10:00
LO will show the hour will flash.
3.
Tap the + or – buttons to change the hour for the dimmer to be low light level.
4.
Tap the SNOOZE/BACKLIGHT button to select start time for dimmer to be on High light
level. 6:00 HI will show and the hour will flash.
5.
Tap the + or – buttons to change the hour for the dimmer to be high light level.
6.
Tap the SNOOZE/BACKLIGHT button to confirm and exit.
Time is inaccurate
•
