4
STATION AND SENSOR MOUNTING
Station:
Place the display directly on a table using the built-in pull-down
stand on the back. Alternatively, hang it on a wall using the triangle hanging
hole on the back.
Sensor:
Insert a screw through the front hanging hole to mount the sensor
outside in a shaded location. For more details, watch our video here:
bit.ly/th_sensor_mounting
.
Built-in Stand Folds down from
back and clicks back into place.
CUSTOM DISPLAY MODES
Press then release the
SET/MODE
button to view Temperature or Humidity
in large numbers. Station will stay on the selection.
Temperature Large Humidity Large
Position vertically to allow
condensation to drain out.
Use the Triangle Hanging
Hole on the back to mount
on a wall.
