La Crosse Technology
Page 12
Use Multiple Outdoor Transmitters
The Wireless Forecast Station will accommodate up to three remote outdoor transmitters (TX14TH). The
channel selection button allows you to easily see the temperature in various locations: outdoors, baby’s
room, greenhouse, basement, etc.
To connect multiple remote transmitters to the Wireless Forecast Station:
1. Remove the battery cover from all the transmitters (Leave battery covers
off until all transmitters are received by the Wireless Forecast Station).
2. Set the first outdoor transmitter to Channel 1 and insert 2-AA batteries.
3. Set the second outdoor transmitter to Channel 2 and insert 2-AA batteries.
4. Set the third outdoor transmitter to Channel 3 and insert 2-AA batteries.
5. Press and hold CH button on the Wireless Forecast Station until a beep
sounds. The Wireless Forecast Station will search for all outdoor
transmitters.
6. Press the TX button on the back of each outdoor transmitter to transmit RF
signal.
7. When RF connection is established, the respective temperature & humidity
for each of the selected channels will appear on the main unit.
8. Allow the transmitters and the Wireless Forecast Station to stay 5-10 feet apart for 15 minutes to
establish a solid connection.
9. Install the battery covers on each sensor.
10.
After 15 minutes place the remote transmitters in appropriate locations (see “position the outdoor
transmitter”).
Press and release the CH button to view channel 1, 2 or 3 on the Wireless Forecast Station when multiple
transmitters are used.
Note
: You cannot change channels if only one transmitter is connected.
Channel Scroll
Press and release the CH button until you see the word AUTO appear in the outdoor data area. The
Wireless Forecast Station will automatically rotate through the channels for all connected transmitters.
Press and release the CH button to lock the Wireless Forecast Station into one channel. Then view
channels individually with a press of the CH button.
Other Display Icons
WWVB Reception Icon
The tower icon will show solid when the Wireless Forecast Station has received the WWVB
signal.
No tower icon displayed. The Wireless Forecast Station was unable to receive a signal at
this time.
Reposition the Wireless Forecast Station for better signal reception or try again at bedtime.
Indoor Readings (Temperature, Humidity, Dew Point, Heat Index)
Outdoor Channel Indicator
The number 1, 2 or 3 will show on the Wireless Forecast Station next to this icon indicating
which transmitter the Wireless Forecast Station is reading. Press and release the CH button to
view other channels when using multiple sensors.
AUTO
When this word appears the outdoor temperature/humidity readings will automatically switch
between channels (using multiple sensors). Press and release the CH button to display only one channel.
Zz
– Snooze Icon
Will flash when snooze feature has been activated
Solid when alarm is on
Does not display when alarm is deactivated.
