1.
Insert the 5 volt power cord into an outlet, then into your Clock.
Optional: Insert 2-AA batteries for backup.
2.
Configure your basic settings.
Power Up
2
The buttons are located at the top of your clock.
Buttons
ALARM
Hold to enter Alarm Settings. Press to view alarm time. Press again to
activate/deactivate alarm.
SNOOZE/LIGHT
Press and release to adjust Backlight HI-LO-OFF. Power Cord required.
When alarm sounds Press once to Snooze Alarm for 10 minutes.
+ (PLUS)
Settings Menu: Press to increase value. Hold to increase quickly.
- (MINUS)
Hold to start or stop Atomic Time Signal search.
Settings Menu: Press and release to decrease value.
Hold to decrease quickly.
MODE
Hold to enter the Settings Menu.
Press and release to toggle Custom Display Options.