La Crosse Technology, Ltd
Page 6
•
The clock will show HELLO for 3 seconds.
•
The lightning bolt will flash while charging.
•
When no device is connected, no battery will show.
•
As your device becomes full and less current is drawn, solid battery icon may show,
before the charge is complete.
USB Output:
Left USB Port: 1 Amp output
Right USB Port: 2 Amp output
Will not Charge my iPhone
•
Insert the included charge cord one-way, then if not charging, insert the other way. The
lightning connector is directional.
•
Try your phone charge cord in the USB port.
NAP Feature
Sometimes, we just want a quick nap without having to set a new alarm. Set the nap
duration one time, then, a simple press of the NAP button starts the nap countdown.
Set Nap Duration:
1. Hold the NAP button for 3 seconds. NAP and the duration will show (default is 10
minutes).
2. Use the +/- buttons to select a nap duration, up to 120 minutes.
3. Press the NAP button to confirm and start the nap count down to zero.
Note:
Set NAP once then just press NAP button to activate anytime.
When you wish to nap:
Press the NAP button once, and the clock will wake you at the
preselected time.
•
From normal time display, press the NAP button once to start the nap feature for the
preset time. NAP will show and the preset minutes will countdown.
•
When the alarm sounds NAP and 0m will flash. The alarm will sound for two minutes
and then stop if no buttons are pressed.
•
Press any button at any time to exit nap mode.
Alarm Clock is dim
•
Press and release the SNOOZE/LIGHT button to determine if the backlight is on HIGH
or LOW.
•
Clock must operate on AC power for backlight to stay on.
Alarm Clock is blank: No letters, numbers, or dashed lines
•
Check the AC adapter. Is it correctly installed and connects to an active outlet.
