11 |
P a g e
NAP TIMER
Sometimes it is easier to use the Nap Timer to avoid reprogramming your time alarm. Set it
one time then just press the NAP button to start the timer.
Set Nap Timer:
1.
Press and hold the NAP button for 3 seconds to enter nap set mode.
2.
The time will flash and start at the preset of 30 minutes. The date area will read “NAP
TIME”
3.
Press + or - buttons to set nap duration. Increase or decrease in 5 min intervals up to
120 min.
4.
Press the NAP button to confirm and start nap.
•
While a nap is in progress the date area will display “NAP TIME” and time will count down
to zero when the alarm will sound.
•
The nap duration will be saved in the station. Next time the NAP button is pressed it will
display the amount of time used last and the nap will start.
•
When alarm sounds, NAP TIME “0m 00” will flash. Alarm beeps for 2 minutes then returns
to normal display or press any button to stop ringing and return to normal display.
USB CHARGING PORT
There is a 1 Amp USB charge port on the back of the station. Power Cord must be in use to
charge a device.
•
Connect your external device’s USB charging cable (not included) to the USB charging port.
•
Charging times will vary.
•
USB Power Output: 1A maximum current. Charge 1A devices or devices that are self-
regulating.
CONNECTED FORECAST FEATURES
ADVANCED FORECAST ICONS & CHANCE OF PRECIPITATION
Connected Alarm clock:
When your alarm clock is connected to the La Crosse View™ app
you will see an additional 8 forecast icons from AccuWeather. Your forecast will update
multiple times per day. The forecast icons predict weather condition for the next 12 hours.
