Station Settings
BASICS
** The default pressure reading is 29.92 INHg (1013 hPa). The station will acclimate on it’s own if the
pressure number is not set. Learn more on page
19
* Rain data will be displayed in Inches when Fahrenheit is selected, and in Millimeters when Celsius is
selected within the Settings Menu.
*
This step is only required if you do not receive the Add Device notification within the app.
Prior to connecting to Wi-Fi and mounting your sensor, make sure your station is receiving sensor data.
Use the
+/-
buttons on the
top of the station to adjust
the values.
Press the
SET
button to
confirm selection and move
to next step.
You may exit the Settings
Menu at any time by pressing
the
LIGHT
button.
Settings Menu Order*
Greeting
•
Language
•
Beep On/Off
•
12/24 Hour Time
•
Hour
•
Minute
•
Year
Month
•
Date
•
Calendar Order (Month/Date or Date/Month)
•
Fahrenheit/Celsius
Pressure Units (InHg/hPa)
•
Pressure Number Setting**
•
Wind Speed Units (MPH
or KMH)
•
Wind Direction (Letters or Degrees)
•
Thank You
1.
2.
When the station is first powered on, it will begin searching for your outdoor
sensors, which should connect shortly.
To manually set your time, date, and other settings, hold the
SET
button to
enter the Settings Menu.
05
Notes:
Weekday will set automatically after year, month, & date settings are adjusted.
If you’re connected to the Wi-Fi, the time and date will automatically update from the
Internet. See pages
Adding Your Sensor to the App
LA CROSSE VIEW
Upon getting the station connected to your Wi-Fi network, the next app screen
will explain how your connected sensor(s) should be brought in. Within the next
15 minutes, you should receive an Add Device notification in your app. This is
indicated by the Red Cloud and the numbers inside of it. Tap this icon to begin
adding your sensor(s) into the app.
06
123456-ABC
123456-ABC
1.
Manually Add Sensor Into the App*
3.
4.
2.
Open your La Crosse View app. On the Main Menu, go to
ADD/EDIT
and select
DEVICES
.
Scan the Barcode on your Breeze Pro Sensor or type in the
Device ID manually.
Confirm the sensor image and Device ID and add a Device
Name and Location Name. Select
DONE
.
On the Devices page, select the
ADD DEVICE
or
PLUS (
+
)
button.
