Two-Tone Atomic Digital Clock
TIMER
The Timer can be set from 1 minute (minimum) all the way up to 24 Hours (maximum).
Set Timer:
1. Hold the TIMER button for 3 seconds. The hour will begin to flash. Press the + or - button to adjust the
Timer hour.
2. Press the TIMER button to confirm, the minutes will then begin to flash. Use the + or - button again to
adjust Timer minutes.
3. Press the TIMER button to confirm and begin Timer countdown.
Timer Hour
Timer Minutes
Timer Countdown
PAUSE/PLAY TIMER:
• While the timer is active press the MINUS (-) button to Pause the timer, press it again to play and
continue the current timer.
• While the timer is PAUSED user can toggle between Clock or Timer display with the PLUS (+) button
• When Timer is PAUSED and clock is displayed the Timer Indicator will show solid without arrows.
START/STOP TIMER:
• Press the TIMER button to start or stop the timer.
• When stopped, Timer returns to last setting. If Timer was set at 45 minutes, when timer is stopped it will
return to 45 minutes.
TIMER SOUNDS:
• When Timer reaches “0” you will hear 5 beeps every 15 seconds for up to 1 minute.
• If the TIMER button is
not
pressed, the timer will begin counting up from “0”.
TIMER OR CLOCK DISPLAY:
• Press the PLUS (+) button to toggle between Timer Counting Display and Clock Display.
• When Timer is active and Clock is displayed the Timer Indicator will show solid. The Up or Down Arrow
will flash.
OUTDOOR
INDOOR
Timer Display
Clock Display
TIMER INDICATORS
Count Up
Timer
Count Down
Timer
Timer
Paused
Page | 5
