La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 2
Battery Backup
•
Insert one “9V” battery into the battery compartment on the back of the clock. The
battery will keep the alarm and time settings until the power is restored.
•
The LED display will not light-up but alarms will sound at their preset alarm time.
•
If there is no battery installed but the power is interrupted, the display will flash at 12:00
and the time and alarm need to be set again.
Three Custom Display Options
Your clock has three unique displays to provide the Time, Date, Temperature and Alarm,
information you need.
Main Front Display: Press the SET button to change the display.
• Press 1: Time Mode (Default)
• Press 2: Temp/Humidity Mode
• Press 3: Date Mode
• Press 4: Alarm 1 Set Time
• Press 5: Alarm 2 Set Time
Left Side Display: Press the “1” with circling arrow button to change the display.
• Press 1: Time Mode
• Press 2: Temp/Humidity Mode
• Press 3: Date Mode (Default)
• Press 4: Alarm 1 Set Time
• Press 5: Alarm 2 Set Time
Right Side Display: Press the “2” with circling arrow button to change the display.
• Press 1: Time Mode
• Press 2: Temp/Humidity Mode (Default)
• Press 3: Date Mode
• Press 4: Alarm 1 Set Time
• Press 5: Alarm 2 Set Time
12-Hour or 24-Hour time format
•
Time can display in 12-hour (am, pm) or 24-hour format.
•
Default is 12-hour time.
•
Use the
to switch time formats.
Manually Set Time/Date: Program Menu
1.
Hold the SET button 2 seconds to enter settings mode.
2.
Press the + or - button to adjust the flashing values.
3.
Hold the + or - buttons to adjust quickly.
4.
Press the SET button to confirm adjustments and move to the next item.
5.
Press the SNOOZE button at any time to exit.
