Model: 616-146v2 www.lacrossetechnology.com/support
Page | 4
Rotate Projection:
Press the
PROJECTION
button to rotate the projection image 90
degrees.
Press the
PROJECTION
button again to rotate another 90
degrees.
Change Projection Modes:
Hold, then release the
PROJECTION
button to switch projection modes. Watch the projection image to view
the changes.
Time and Outdoor Temperature: alternate every 5 seconds
(default)
Time only
Outdoor Temperature only
USB CHARGE PORT
Charge a smart phone, camera or other devices when the forecast
station is plugged into a power outlet with the included 5V AC
adapter.
Note:
This is a power-output charging port. It does not supply power
to the projection clock.
Connect your external device’s USB charging cable (not included)
to the USB charging port.
Charging times will vary.
USB Power Output:
1A maximum current. Charge 1A devices or
devices that are self-regulating.
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
Press the
-/TIME
button to start or stop a manual signal search.
WWVB Icon will flash
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
LOW BATTERY ICON
If the icon is displayed in Outdoor Temperature section,
replace batteries in the outdoor sensor.
If the icon is displayed in Indoor Temperature section,
replace batteries in the projection clock.
WWVB
Icon
Low
Battery
Icon
