http://www.lacrossetechnology.com/support/
Page | 4
PROJECTION (On/Off, rotate, projection mode)
Battery Power:
Press and release the
SNOOZE/LIGHT
button to
show the
projection for 10 seconds.
Note:
Using Battery power, the projection and backlight will come on for 10
seconds when
SNOOZE/LIGHT
is pressed.
Projection will not display
constantly when operating on battery power.
A/C Power Projection ON/OFF:
Projection is displayed constantly unless
turned off.
•
Hold the
+/PROJ
button for 3 seconds to turn off the projection.
•
Press and release the
+/PROJ
button to turn on the projection.
Rotate Projection:
•
Press and release the
PROJECTION
button to rotate the projection
image 90 degrees.
•
Press and release the
PROJECTION
button again to rotate another 90
degrees.
Change Projection Modes:
Hold, then release the
PROJECTION
button to
switch projection modes. Watch the projection image to view the changes.
•
Time and Indoor Temperature: alternate every 5 seconds (default)
•
Time
•
Indoor Temperature
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
•
Press and release the
-/TIME
button to start or stop a manual signal
search. WWVB Icon will flash
For information about WWVB visit:
http://bit.ly/AtomicTime
TEMPERATURE TREND INDICATORS
The temperature (2°F/1°C) trend indicators update every 30 minutes or less.
•
Temperature has
risen
in the past 3 hours.
•
Temperature has
not changed
in the past 3 hours.
•
Temperature has
fallen
in the past 3 hours.
LOW BATTERY ICON
If the icon is displayed in Indoor Temperature section,
replace batteries in the projection clock.
Low
Battery
Icon
WWVB
Icon