La Crosse Technology, Ltd.
Page 3
4.
Press and release the + or - buttons to adjust the hour. Hold to adjust quickly.
5.
Press and release the ALARM button to confirm and exit.
Activate/Deactivate Time Alarm
The alarm will be active after setting. The alarm icon (clock) will show.
From normal time display, press and release the ALARM button to deactivate or activate
the alarm.
Snooze Alarm
When alarm is sounding, press SNOOZE LIGHT button to silence the alarm for 10 minutes.
The snooze icon Zz will flash.
Press any button except SNOOZE/LIGHT to silence the alarm for 24 hours.
This is a crescendo alarm. It will sound for 2 minutes then shut off if no buttons are
pressed.
Time is incorrect
Time is manually set.
Manually Set Time/Calendar/Alarm: Program Menu
TIP:
Press only one button at a time while setting the clock.
Hold then release the
SET
button to enter time set mode.
Press and release the
+
or
-
buttons to adjust the values. Hold to adjust quickly.
Press and release the
SET
button to confirm and move to the next item.
Time set order:
• 12/24 hour time format
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
1. Hold the
SET
button for 3 seconds.
2. 12Hr will flash. Press and release the
+/-
button if you prefer 24 hour time.
3. Press and release the
SET
button to confirm and move to the hour.
4. The Hour will flash. Press and release the
+/-
button to adjust.
5. Press and release the
SET
button to confirm and move to the minutes.
6. The Minutes will flash. Press and release the
+/-
button to adjust.
7. Press and release the
SET
button to confirm and move to the year.
8. The Year will flash. Press and release the
+/-
button to adjust.
9. Press and release the
SET
button to confirm and move to the month.
10. The Month will flash. Press and release the
+/-
button to adjust.
11. Press and release the
SET
button to confirm and move to the date.
12. The Date will flash. Press and release the
+/-
button to adjust.
13. Press and release the
SET
button to confirm and move to Fahrenheit/Celsius selection.
14. The °F will flash. Press and release the
+/-
button to select °C.
15. Press and release the
SET
button to confirm and exit.
