La Crosse Technology, Ltd.
Page 2
Clock Factory Restart
1. Remove batteries and AC power from the clock.
2. Press one of the buttons on the clock at least 20 times to clear all memory. Verify that the
clock is blank before proceeding.
3. Let the clock sit with batteries out for at least 10 minutes.
4. Insert the AC power cord or fresh alkaline batteries in the clock.
Projection Alarm Clock
How tall are the Time Numbers?
The time numbers are 1.25 inches tall.
12-Hour or 24-Hour Time Format
Display the time in 12-hour or 24-hour format
Default is 12-hour time.
Power Requirements
This clocks powered by a 4.5 volt AC power adapter
Alternatively, optional 2-AAA alkaline
Fahrenheit/Celsius
Be sure the Time is showing on the clock.
Press and release the SET button to switch between Fahrenheit and Celsius for the indoor
temperature reading.
Inaccurate Indoor Temperature Reading
Look for heat sources such as sunlight, door or window frames, or reflected heat of cold.
Projection
TIME will project continually when operating with the AC power cord. This is the constant item to
be projected. There is not an option to project indoor temperature.
Battery Operation:
Press and release the
SNOOZE/LIGHT button to
show the projection for 3
seconds.
Note:
Projection will not display constantly when operating on battery power.
AC Operation:
Projection will display constantly.
Projection Arm:
The projection arm will rotate 180 degrees to allow you to project on the wall
or ceiling.
Projection Rotation:
Press and release the PROJECTION button to rotate the projected time
in 90-degree increments.
Focus:
Adjust the focus of the projection with the focus wheel on the back of the projection arm.
Set Time Alarm
1.
Hold then release the ALARM button to enter time set mode. The alarm hours will flash.
2.
Press and release the + or - buttons to adjust the hour. Hold to adjust quickly.
3.
Press and release the ALARM button to confirm and move to the minutes. The alarm
minutes will flash.
