La Crosse Technology, Ltd
Page 7
DST AUTO ON: (Automatically gain 1 hour in spring, lose 1 hour in fall)
DST OFF: (Remain in Standard Time all year long)
DST ON: (Remain in Daylight Saving Time all year long)
•
Dependent on your location, position of the clock in your home, and atmospheric
interference, it may take up to 5 nights for the change from Daylight Savings Time to
Standard Time and vice-versa to occur.
•
Check for a
WWVB
Tower Icon showing on the atomic digital clock. The tower icon
indicates you have received the WWVB signal from Ft Collins CO in the past 24 hours.
•
Check that the clock is in the correct
Time Zone
.
•
Check whether the DST indicator is AUTO ON, OFF or ON. If the indicator is OFF or
ON the clock will not change seasonally.
•
Check for fresh
batteries
. Without proper batteries, the antenna will have a harder
time picking up the signal.
•
Position the digital clock in a window (
with the front or back
) facing Ft. Collins, Colorado
and leave for up to five nights. If you do not have a window facing this direction,
position the clock near an outside wall and point the unit in this general direction.
Manually Set Time/Date: Program Menu
There are seven function buttons: SNOOZE | ALARM | SET | + (PLUS) | - (MINUS)
1. Hold the SET button 2 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the SET button to confirm adjustments and move to the next item.
5. Press the SNOOZE button at any time to exit.
Time set order:
•
Language (English, Español, Français)
•
Beep ON/OFF
•
Atomic ON/OFF
•
DST AUTO ON / DST OFF / DST ON
•
Time Zone
•
Hour
•
Minutes
•
Year
•
Month
•
Date
•
Temperature Fahrenheit/Celsius
To begin:
1. Hold the SET button for 2 seconds to enter setting mode. ENGLISH will flash. Press the
+ or - button to select language.
2. Press SET to confirm and move to beep sound ON/OFF. BEEP ON will show. ON
flashes. Press the + or - button to turn the button beep sound off.
3. Press SET to confirm and move to the atomic time ON/OFF. ATOMIC ON will show.
ON flashes. Press the + or - button if you do not want Atomic Time signal (OFF).
