ATOMIC DIGITAL CLOCK
7 | PAGE
Factory Restart:
When the outdoor readings show NO and searching for the sensor has not helped, complete a full restart:
1. Bring the sensor in the house about five feet from the clock.
2. Remove batteries from the sensor, and from the clock
3. Press any button 20 times.
4. After 15 minutes, insert batteries into the sensor, and into the clock.
5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.
FACTORY RESTART
SENSOR WEATHER SHIELD
• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor
from rain and snow.
• This shield will offer limited protection from the sun’s heat.
If you require additional support, get in touch with our friendly customer support team based out of La
Crosse, WI.
Phone:
1-608-782-1610
Online:
Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.
WE’RE HERE TO HELP!
JOIN THE CONVERSATION
LOW BATTERY INDICATORS
• A Low Battery Indicator between the Outdoor Temperature/Humidity means you need to replace the
batteries in your sensor.
• A Low Battery Indicator by the time means you need to replace the batteries in your station.
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
