La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 3
may be overpowered or underpowered. Remove batteries from the
atomic clock.
Press any button 20 times. Leave the atomic clock unpowered for 1-2 hours.
Install fresh Alkaline batteries with correct polarity.
If the indoor temperature is still shows dashes, HH.H or LL.L, the atomic clock
may need replacement.
Inaccurate Indoor Temperature Reading
Explanation: When the indoor temperature is inaccurate, it is often due to the
location of the display or overpowered/under powered batteries. You can test the
accuracy at you home.
Side-by-side test: Bring the remote sensor in the house and place it next to the
atomic clock for 2 hours.
Compare indoor and remote temperature. The temperature should be within 4
degrees to be within tolerance.
Look for heat sources such as sunlight, door or window frames or reflected heat
or cold near the atomic clock.
Set Time Alarm
Hold the ALARM button for 5 seconds to enter the alarm setting mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the + or - buttons to select the hour.
3. Press and release the ALARM button to set the minutes.
4. The minute digits will flash.
5. Press and release the + or - buttons to adjust the minutes.
6. Confirm with the ALARM button and exit.
Activate/Deactivate time alarm
Press and release the ALARM button once to show alarm time.
Press and release the ALARM button to activate/deactivate the Alarm.
The bell icon will disappear when the alarm is no longer active.
Snooze Alarm
When the alarm sounds, press the LIGHT button to trigger snooze alarm for 10
minutes. The snooze icon will flash when the snooze feature is active.
To stop alarm for one day, press ALARM button, while in snooze mode. The bell
icon will remain solid.
Note: When the alarm sounds, it continues for 2 minutes and then shuts off
completely.
Manually Set Time/Date: Program Menu
1.
Hold the SETTINGS button to enter settings mode.
2.
Press the + or - buttons to adjust the values.
3.
Press the SETTINGS button to confirm adjustments and move to the next item.
