FAHRENHEIT/CELSIUS
: From normal display mode, press
and release the °F/°C button to select temperature readings in
Fahrenheit or Celsius
RESET BUTTON
: If the Analog-Style Digital Atomic Clock is
not working properly with good batteries, press the RESET
button one time to reset the clock.
SECONDS
: The seconds will populate around the outer edge
between the five minute marks.
WWVB RADIO CONTROLLED TIME
The NIST radio station, WWVB, is located in Ft. Collins,
Colorado and transmits the exact time signal continuously
throughout the United States at 60 kHz. The signal can reach
a distance of 2,000 miles from the transmitter. The Analog-
Style Digital Atomic Clock receives this signal through the
internal antenna. However, due to the nature of the Earth’s
Ionosphere, reception is very limited during daylight hours.
WWVB RECEPTION ICON
with full signal strength will
appear on screen along with the word OK if the reception of
WWVB time signal is successful.
•
No tower icon displayed. The Analog-Style Digital Atomic
Clock was unable to receive a signal at this time.
•
Reposition the Analog-Style Digital Atomic Clock for better
signal reception or try again at bedtime.
•
Press the /SET button once to force a signal search at night
when reception is best.
•
The Analog-Style Digital Atomic Clock will search each hour
for a WWVB time signal.
Note:
In case the Analog-Style Digital Atomic Clock is not able
to detect the WWVB time signal after 5 nights, (disturbances,
transmitting distance, etc.); slide the
/
ON/OFF switch to OFF
and follow the
program menu
to set the time manually.
POSITIONING THE ANALOG-STYLE DIGITAL ATOMIC
CLOCK:
Place the Analog-Style Digital Atomic Clock near an exterior
wall with the front or back facing toward Ft. Collin Colorado for
best WWVB reception. The display should be six feet from
other electronics or wireless devices.
CARE AND MAINTENANCE:
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Do not expose the Analog-Style Digital Atomic Clock to extreme
temperatures, vibration or shock.
•
Keep Analog-Style Digital Atomic Clock dry.
•
Clean the Analog-Style Digital Atomic Clock with a soft damp cloth. Do
not use solvents or scouring agents.
•
The Analog-Style Digital Atomic Clock is not to be used for medical
purpose or for public information, but is for home use only.
•
The specifications of this Analog-Style Digital Atomic Clock may
change without prior notice.
•
Improper use or unauthorized opening of housing will void the
warranty.
SPECIFICATIONS:
Indoor Temperature Range: +14.2°F to +122°F
(-9.9°C to 50°C)
Resolution:
0.1 degree
Humidity Range:
5%-99%
Resolution:
1%
Battery Life:
Analog-Style Digital Atomic Clock: Battery life over 12 months
Dimensions:
Analog-Style Digital Atomic Clock: 8.63" x 1.28" x 10.34"
(219.2 x 32.5 x 262.6mm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid
only on products purchased and used in North America and only to the
original purchaser of this product. To receive warranty service, the
purchaser must contact La Crosse Technology, Ltd for problem
determination and service procedures. Warranty service can only be
performed by a La Crosse Technology, Ltd authorized service center.
The original dated bill of sale must be presented upon request as proof
of purchase to La Crosse Technology, Ltd or La Crosse Technology,
Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our
option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty
period specified above. All replaced parts and products become the
property of La Crosse Technology, Ltd and must be returned to La
Crosse Technology, Ltd. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer.
La Crosse Technology, Ltd will pay all expenses for labor and materials
for all repairs covered by this warranty. If necessary repairs are not
covered by this warranty, or if a product is examined which is not in
need or repair, you will be charged for the repairs or examination. The
owner must pay any shipping charges incurred in getting the La Crosse
Technology, Ltd product to a La Crosse Technology, Ltd authorized
service center. La Crosse Technology, Ltd will pay return ground
shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material
and workmanship with the following specified exceptions: (1) damage
caused by accident, unreasonable use or neglect (including the lack of
reasonable and necessary maintenance); (2) damage occurring during
shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4) damage
resulting from failure to follow instructions contained in the owner’s
manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse
Technology, Ltd authorized service center; (6) units used for other than
home use (7) applications and uses that this product was not intended
or (8) the products inability to receive a signal due to any source of
interference.. This warranty covers only actual defects within the
product itself, and does not cover the cost of installation or removal
from a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from
installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY
FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER
SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC
INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other
rights specific to the State. Some States do not allow the exclusion of
consequential or incidental damages therefore the above exclusion of
limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is
available at:
www.lacrossetechnology.com/513-1311
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
FCC Disclaimer:
This Device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) the device must accept any interference
received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER AUTHORITY TO OPERATE THE
EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form,
even in excerpts, or duplicated or processed using electronic,
mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections made
in the next issue. We accept no liability for technical mistakes or
printing errors, or their consequences.
All trademarks and patents are acknowledged.
