background image

7

x

MINUTES

: The Minutes will flash. Press and release the PLUS button to set the Minutes.  

Press the SET button once to continue. 

x

12/24-HOUR TIME

: 12hr or 24hr will flash. Press and release the PLUS button to select 12-

hour or 24-hour time mode.  Press the SET button once to continue. 

x

WEATHER FORECAST ICON

: The forecast icon will flash. Press and release the PLUS 

button to select the forecast Icon that represents your current local weather. Press and 
release the SET button to exit. 

x

NOTE

: If possible, it is best to select the 

RAINY ICON

 when it is raining outside. This allows 

for the most accurate future forecasts based on barometric pressure changes. 

x

DST

: dSt on or dSt of will flash. Press and release the PLUS button to turn the DST feature 

ON or OFF. Pres and release the SET button to continue. 

SET TIME ZONE:

x

TIME ZONE: 

Press and release ZONE button to select four U.S. Time Zones: 

(ES

 Eastern,

 CS

 Central, 

MS

 Mountain, 

PS

 Pacific)  

NOTE

: This station will only support these 4 Time Zones. 

WEATHER FORECAST ICONS: 

The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric 
pressure. The weather forecast is based on atmospheric pressure change and is about 70-75% 
correct.  As weather conditions cannot be 100% correctly forecasted, we cannot be responsible 
for any loss caused by an incorrect forecast. 

SET ALARM:

x

ALARM HOUR

: Press and hold AL button to enter alarm time setting mode. The Alarm Hour 

will flash. Use the PLUS or MINUS button to set the Hour. Please note AM or PM. Press and 
release the AL button.  

8

x

ALARM MINUTE

: The Alarm Minutes will flash. Use the PLUS or MINUS button to set the 

Minutes. Press and release the AL button. 

ALARM ACTIVATION:

x

 

Press and release the AL button to show Alarm Time.  

x

 

When in Alarm Mode press and release the PLUS or MINUS button to activate or deactivate 
the Alarm.

x

 The 

alarm 

icon

 appears when alarm is activated.  

x

 

To stop alarm for one day, press AL button, when the alarm sounds. The alarm icon 

 will 

show solid.   

SNOOZE: 

x

 

Press the Zz/CH button when the alarm sounds, to trigger the snooze alarm for 5 minutes

.

The snooze icon 

Zz

 will flash.

x

 

To stop alarm for one day, press AL button, while in snooze mode. The alarm icon 

will 

show and the snooze icon 

Zz

 will disappear. 

FAHRENHEIT/CELSIUS:
Transmitter:

 Remove the battery cover then press and release the 

C/F

 button on the transmitter 

to select Fahrenheit or Celsius.

Atomic clock

: Hold the 

-/CF

 button for 3-5 seconds to switch from Fahrenheit to Celsius. 

x

Channels

: If more than one transmitter is used, set each transmitter to a different channel. 

To view: press the CH button to select Ch1, Ch2, Ch3 and auto-channel: scrolling all  
channels.  

x

Auto-channel

 will show a circling arrow 

 above the channel number and will rotate 

through each channel approximately every 8-10 seconds 

Содержание 512A-811








Отзывы: