Viewing Your Forecast Data
FORECAST
Daily & Hourly Forecast Buttons
When connected to Wi-Fi, use the
DAILY
&
HOURLY
buttons on the side of the station to view
future forecast information.
Tip:
The icon will appear in the top right corner of the forecast section when your display is
connected and receiving AccuWeather forecasts.
Sunny
Light Snow
Clouds
Wintry Mix
Rain
Ice
Partly Sunny
Snow
Light Rain
Windy
T-Storm
Fog
Available Forecast Icons when Connected*
Daily Forecast:
Press the
DAILY
button on the side of the station to
automatically scroll through 7 days
of forecast data, including forecast
icons and highs and lows.
Hourly Forecast:
Press the
HOURLY
button to view 12 hours
of future forecasts, including
forecast icons and forecasted
temp. & humidity with time stamps.
17
Relative Pressure
Add-On Temperature & Humidity Sensor
PRESSURE
EXTRA SENSORS
•
Your Relative Pressure reading will come from your
station’s internal barometer.
•
Please allow up to 10 days for automatic calibration, or
program your local pressure value in the Settings Menu.
•
The arrows located to the left of the values represents
Pressure Tendency (rising/falling).
2.
Hold the
MINUS
(
-
) button to delete these
Temperature & Humidity readings.
3.
Press the
SENSOR
button until this Outdoor
Temp. and Humidity section lights up again.
Then hold the
PLUS
(
+
) button until the blue
Sensor Reception Indicator starts to animate.
Adding a Separate Temperature & Humidity Sensor
Pressure Reading Example
If you feel the temperature & humidity is not reading correctly from your
Breeze Pro Sensor, you can add a separate sensor to your system.
www.lacrossetechnology.com/view
to learn more.
1.
Press the
SENSOR
button until you see the
Outdoor Temperature and Humidity section light
up on screen. “ID WTH 123” and “THW SENSOR”
will appear below.
4.
5.
Install new batteries into the add-on sensor
and press the
TX
button inside its battery
compartment. The LED light on the sensor
will flash.
The sensor should connect almost instantly
with its data appearing on screen. The
icon will appear when an add-on TH sensor
is being used.
18