07
08
PRESSURE
PRESSURE & RAIN
Pressure Settings
•
Your Relative Pressure reading will come from your station’s internal barometer.
•
Please allow up to 10 days for automatic calibration, or program your local
pressure value with the
MODE/PRESSURE
button.
•
The arrows located to the left of the values represents Pressure Tendency
(rising/falling).
Use the
+/-
buttons on the
top of the station to adjust
the values.
Press the
MODE/PRESSURE
button
to confirm selection and move to next
step or exit.
Hold the
MODE/PRESSURE
button to enter the Pressure Settings Menu to set
your Units of Measure (INHG or HPA) and Pressure Value.
View Pressure & Rain Readings
•
Pressure and Rainfall readings share the same display area on your station.
Pressure is displayed.
Rain is displayed.
Autoscroll between
Pressure and Rain
readings.
•
Press the
MODE/PRESSURE
button to toggle between Pressure and Rain
readings.
•
The Pressure or Rain icon will show to indicate which reading you are viewing.
•
When the Autoscroll Icon is displayed, the station will toggle between current
Pressure and Rain readings.
Change what is displayed:
Pressure Trend Arrows
Indicate rising or
falling pressure.
Pressure is displayed
Rain is displayed
Sensor Reception
