The wind station will accommodate up to two additional
thermohygro sensors (TX141TH-BCH ) on channels 2 and 3.
Note: The TX141W sensor must be on channel 1.
Press the button to view sensors on other channels.
Setup additional sensors to the wind station:
1. Remove the battery cover from all the sensors
(leave battery covers off until all sensors are received
by the wind station).
2. Set the first additional sensor to Channel 2 and insert
2 AA batteries.
3. Set the second additional sensor to Channel 3 and insert
2 AA batteries.
4. Hold the button on the wind station for 5 seconds to
search for sensors.
5. Press the TX button on each sensor.
6. When connection is established, the temperature &
humidity for each of the selected channels will appear.
7. Install the battery covers on each sensor.
8. Keep sensors and the wind station 5-10 feet apart for 15
minutes to establish a solid connection.
9. After 15 minutes, place the remote sensors in appropriate
shaded locations.
10. Press and release the button to view channels 1, 2 or 3 on
the wind station when multiple sensors are used.
Note: If only one sensor is connected, the other channels will
show dashes for temperature and humidity.
Page | 13
www.lacrossetechnology.com/support
Model: 327-1414W
Setup Add On Temperature/Humidity Sensors
Channel Indicator
• Press the button to toggle between remote sensor channels when multiple
sensors are used.
Channel Auto Scroll
• The wind station will automatically rotate through the channels for all
connected sensors.
• Press and release the button to lock the wind station into one channel.
• Then press the button to view channels individually.
AA
1 2 3
AA
AA
AA
