Model: 308-1425CA https://www.lacrossetechnology.com/308-1425ca Page | 2
Quick Setup
Step 1:
Insert the 5 volt AC cord (included) into the wall outlet then into the weather station.
Step 2:
Insert the 3
new
AAA Alkaline batteries (not included) into the weather station. Observe the
correct polarity.
Step 3:
Insert the 2
new
AA batteries (not included) into the TX141TH-Bv3 remote sensor. Observe
the correct polarity. The red LED will flash during transmission.
Restart:
If the remote temperature is not displayed after 3 minutes, unplug the AC adapter and
remove batteries from the weather station & sensor and press any button 20 times. After 15 minutes
return to
Step 1
above.
Table of Contents
