3. Insert 2-AA batteries (not included) into the back of the station.
4. Keep sensors and weather station within 5 feet for at least 15
minutes after installing batteries. This allows the sensor and station
to sync properly and ensures a strong connection.
5. After 15 minutes, place sensors in desired locations (position
sensors
page 7
).
6. Set time, date, etc.
AA
AA
Button Function Explanation
For better programming instructions, please note these terms for
button use:
• Press: Press and release the designated button.
• Hold: Hold the button for 3 seconds then release the button.
308-1412-3TX
www.lacrossetechnology.com/support
Page | 2
