• Always purchase the correct size and grade of battery most suitable
for intended use.
• Clean the battery contacts and also those of your clock prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an extended
period of time.
• Promptly remove an expired battery.
• The specifications for this wall clock may change without prior notice.
• Improper use or unauthorized opening of movement or clock housing
will void any warranty.
CARE & MAINTENANCE
Battery Requirements:
1 AA (IEC, LR6, 1.5V) required in the
Battery Compartment (Alkaline recommended)
Battery Life:
12 months
Temperature Range:
-40°F to 140°F
Humidity Range:
0% to 100%
SPECIFICATIONS
POWER UP
1. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Note:
The quartz movement
will keep the clock running
accurately. If the clock does not
operate, or steadily loses time,
replace the battery.
Time Set
Wheel
Battery
Compartment
AA
Learn more from our video:
• The Thermometer and Hygrometer are self-adjusting and do not need
a battery to operate.
• Allow 24 hours for proper automatic adjustment.
THERMOMETER & HYGROMETER
REMOVE COVER FROM MOVEMENT
1. OPEN: Turn the Cover counter clockwise until the head is aligned
to the arrow. Lift off.
2. CLOSE: Place cover in open position. Turn the Cover clockwise
until the head is on top, directly under the hanger hole.
MOUNTING
1. Be sure the Cover is in the closed position.
2. Use the top Hanger Hole to mount the clock.
CLOSE
OPEN
OPEN
CLOSE
OPEN
CLOSE
