IGNITION – ADJUSTMENTS
Oven light - Injectors
24
Installation Guide - “Cornuchef” Range
Technical characteristics of the light:
- 25W
- 230V - 240V
- 300°C
- E14 base
The part numbers of the injectors for the various burners and the gas oven (see their
locations on the photographs below) differ depending on the type of gas used and the
country of installation.
The injectors of gas burner and hotplate are replaced according to the following sequence:
1. Remove the brisk heat grill, then the pan.
2. Remove the cap of the burner.
3. Unscrew the injector from the top using a standard 7 mm box spanner. Install the new
injector and screw it down completely.
4. Place the cap of the burner taking care to place it correctly on the body of the burner.
5. Place the pan, then the grill or the fire plate.
Injector for gas oven
3. C
HANGING THE INJECTORS
Injector
Burner cap
GAS BURNER AND HOTPLATE
1
2
