Stormscope
®
WX-500 User’s Guide
3-4
Chapter 3 - Operation
ERROR
FAULT SOURCE
TYPE*
RECOMMENDED ACTION
Error 19
Processor Fault
Main Processor
data overload
NF/R
Continue without weath
-
er mapping functions.
See your dealer for
service if this error oc
-
curs frequently.
Error 20 Configu-
ration Changed
Antenna jumper
configuration
changed since
last time power
was applied to the
system
NF/R
Select antenna location
via MFD. If selection
matches processor con
-
figuration jumpers, nor-
mal operation returns. If
not correctable, continue
without weather mapping
functions and see your
dealer for service.
Error 21
Processor Fault
Main processor
F
Turn off the unit and see
your dealer for service.
Error 22
Invalid Synchro
Signals
Invalid XYZ input
(gyro may still be
spinning up)
NF/R
Continue without head
-
ing stabilization. See
your dealer for service.
Error 23
Invalid Synchro
Ref
No 400 Hz refer
-
ence
NF/R
Continue without head
-
ing stabilization. See
your dealer for service.
Error 24
Mic Key Stuck
Mic key (inhibit
line) stuck. The
microphone key
has been de
-
pressed for more
than 1 minute
NF/R
Turn off the unit and see
your dealer for service.
Errors 35 and 36
Processor Fault
DSP or main
processor
F
Continue without weath
-
er mapping functions.
See your dealer for
service.
Errors 35 and 36
Processor Fault
DSP or main
processor
NF/R
See your dealer for ser-
vice if this error occurs
frequently.
Error 40
Processor Fault
Main processor
NF/R
See your dealer for ser-
vice if this error occurs
frequently.
Table 3-1: Error Messages (continued)
*F=Fat
al, NF=Nonfatal, R=Recoverable, NR=Nonrecoverable (Description
follows table.)
Error Messages