L3 Mobile-Vision Flashback3, Руководство пользователя, Страница: 29 / 280

Peripherals
VLX Wireless Microphone
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision

6.23.2017
P a g e 21

Configure your VLX as a record trigger on the Flashback . If you are using
the Fleet Management feature, see “Changing the Triggers for a Flashback DVR
that is Not Assigned to a DVR Group” or “Changing the Triggers for a Flashback
DVR Group” in the DVRs chapter of your DES Administrator’s Guide. If you
are
not using the Fleet Management feature, see “Selecting & Configuring Rec-
ord Triggers” in your Flashback User’s Guide .

Always maintain a strong battery charge . For more information, see “VLX
Battery Considerations” on the next page.

Use the VLX with the lapel mic . Although the VLX
comes with an internal mic, it is designed only as a backup
mic in the event that the lapel mic fails. Whenever possi-
ble, use the lapel mic as your primary microphone. If you
use the
internal mic as your primary microphone, you may
encounter audio interference due to wind and road noises
that are more easily picked up when a mic is connect-
Starting a Recording From the VLX
To
start a recording, slide the VLX switch down . The unit will vibrate once , indicat-
ing that you have successfully initiated a recording. To stop a VLX initiated record-
ing, press from the Flashback monitor or DVR. The unit will vibrate twice , in-
dicating that you have successfully ended the recording.
HINT
: If you receive any audio feedback after activating the microphone, use the
button on your Flashback monitor to decrease the volume slightly.
WARNING
: If you feel two short vibrations after you initiate a recording, it indi-
cates that the recording has stopped. This typically occurs when the DVR door is
open or there is no memory card in the card slot.
To initiate a
recording session,
slide this switch
down
ed to your waist vs. your chest.