L3 Aviation Products L3 9029000-20000 Скачать руководство пользователя страница 19

Страница: 19 / 27

Airplane Flight Manual Supplement or Supplemental Flight Manual for the NGT-9000

Revision 4 Issue:

9/19/17

Page 19 of 27

Document Number L3-76AK-AFMS1

FAA Approved

Table 3-1: Troubleshooting for the Panel Mount NGT-9000

Symptom

Screen

Cause/Corrective Actions

•

Display indicator ADS

ONLY (Models with
TAS/TCAS only) showing
on traffic screen.

•

MSG button on screen.

Traffic

A traffic mode indicator that is shown when TAS/TCAS is
failed (or not available) and ADS-B is operating.

1. Possible problem with directional antenna or

internal hardware.

2.  Cycle power to the unit.
3.  Check System Status Messages.
4.  Check the Lynx MAT fault log.
Contact L3 Field Service before removal of unit.

•

Display indicator

TAS/TCAS ONLY
(Models with TAS/TCAS)
showing on traffic
screen.

•

MSG button on screen.

Traffic

A traffic mode indicator that is shown when TAS/TCAS is
in operation but ADS-B traffic information is not available

1. The TAS/TCAS is operational on the ground but

there is no heading input and ground speed is <
7kts.

2. The GPS is failed (GPS has not acquired).
3. Possible problem with L-Band antenna or internal

hardware.

4.  Cycle power to the unit.
5.  Check System Status Messages.
6.  Check the Lynx MAT fault log.
Contact L3 Field Service before removal of unit.

Display indicator TAS/TCAS
STBY (Models with
TAS/TCAS) showing on
traffic screen.

Traffic

A traffic mode indicator that is shown when the Traffic
Awareness (TAS/TCAS) system is in standby.

1. This is a normal condition when the aircraft is on

ground.

2. If the indication is seen during flight. Contact L3

Field Service before removal of unit.

•

Display indicator

TRAFFIC FAILED
(Amber text) showing on
traffic screen.

•

MSG button on screen.

Traffic

Displayed if both ADS-B and TAS/TCAS (optional) have
failed.

1. Cycle power to the unit.
2. Check the secondary equipment (antenna) for

problems.

3. Check System Status Messages.
4. Check the Lynx MAT fault log.
Contact L3 Field Service before removal of unit.

Содержание L3 9029000-20000




























Результаты поиска

Содержание L3 9029000-20000

Отзывы:

Похожие инструкции для L3 9029000-20000

Бренды по названию

Популярные бренды

L3 Aviation Products L3 9029000-20000, Дополнение к руководству по эксплуатации воздушного судна

Результаты поиска

Содержание L3 9029000-20000

Отзывы:

Похожие инструкции для L3 9029000-20000

Бренды по названию

Популярные бренды