GH-3100
Installation & Operation Manual
Page 3-6
Installation Checkout
TP-559
March 30, 2017
Revision K
3.2.2.2.6 VOR System Test
This Paragraph only applies to aircraft with the indicator configured to display VOR information.
1.
Set up a valid VOR input to GH-3100 Indicator.
Figure 3-3: VOR Display
2.
Select VOR normal display using the GH-3100 Indicator menu and observe normal indication of the
following VOR display data (refer to Figure 3-3).
•
VOR Mode Descriptor
•
Left/Right Deviation Indicator
•
Selected Course
•
To/From Ambiguity Indicator
3.
Turn off the VOR input and observe that the VOR display data is removed.
3.2.2.2.7 DME System Test
The following paragraphs apply only to aircraft with a DME installed and the indicator configured to
display DME information.
1.
Set up a valid DME input to GH-3100 Indicator.
Figure 3-4: DME Display
