L2G SAS 17, AVENUE DU 24 AOÛT 1944 - 69960 CORBAS
: +33(0)4 72 23 23 98 +33(0)4 72 23 23 99
www.L2Gfrance.fr
PRODUCT OVERVIEW
Model No.
Article description
BBC208S
Sliding two door back bar cooler
BBC330S
Sliding three door back bar cooler
INSTALLATION
• Store the unit upright. If the unit has been stored or transported on its back, front or sides then it must be
placed upright for at least an hour before switching on.
• Place the unit on an even floor as far away as possible from any source of heat.
Note: Do not move unit by lifting either the door or door handle as this may cause damage to the
cabinet.
• Please ensure the correct aperture size is made available for this unit.
• The correct aperture size should give a gap of approximately 30 mm between the top of the cabinet
and the underside of the back bar and between the back of the unit and the wall. Poor ventilation due to
insufficient aperture size is likely to cause: reduced cooling; icing up; premature compressor failure.
Sliding door models
SPACE REQUIRED
All dimensions exclude door handle
Height
Width
Depth
BBC208S
930 mm
660 mm
542 mm
Height
Width
Depth
BBC208S
900 mm
600 mm
512 mm
Height
Width
Depth
BBC330S
1380 mm
660 mm
542 mm
Height
Width
Depth
BBC330S
1350 mm
600 mm
512 mm
SPACE REQUIRED
All dimensions exclude door handle
UNIT DIMENSIONS
All dimensions exclude door handle
UNIT DIMENSIONS
All dimensions exclude door handle
1
BACK BAR COOLER
USER & INSTALLATION GUIDE
