L2 Audio WMP12H, Руководство пользователя и инструкция по эксплуатации

Страница: 5 / 8

5. Input on the WMP12H is via either male XLR or ¼” jack.
6. Output
or link out is for connectivity to another powered monitor and should be linked
with a quality screened ¼” jack signal lead.
7. Gain
. This regulates pre-amplification of the signal coming from the input "IN", ensuring
perfect operation of the channel circuits.
8. Volume
. This operates the signal level.
9. Graphic
Equalizer . This is to cut frequencies that sometimes occur. By cutting certain
frequencies you can sometimes get more volume from the monitor. You can also boost
frequencies although this will greatly increase the chances of feedback.
10. Speaker
output . This is to connect to a WM12H unpowered monitor. This will then share
the 200 watts power amplifier within the WMP12H. Connection is via speakon®.
WMP10 WMP12
Frequency response 72Hz-20KHz 55Hz-20KHz
Sensitivity 1w/1mt 96dB 97dB
Maximum SPL 117dB 119dB
Power handling (RMS) 140 watts 200 watts
Horn dispersion 90º x 45º 90º x 60º
Crossover frequency 5KHz 3.5KHz
Impedance 8 ohm 8 ohm
Graphic equalizer no 5 band
Amp class AB AB
Input connectors ¼ “ jack ¼ “ jack, XLR
Link out ¼ “ jack ¼ “ jack
Speaker output ¼ “ jack speakon®
Top hat 35mm 35mm
Handles 1 plastic bar 1 plastic bar
Construction Carpet over 18mm
chipboard.
Carpet over 18mm
chipboard.
Dims ( WxHxD) 370x442x319 412x547x360
Weight 15.5kg 21.5kg
Specifications WMP Series Powered Stage Monitors