3 of 4
6/27/17
Pntd Frmhs Storage Console
STEP 3
Lay top panel (A) upside down on non-abrasive
surface and attach left side panel (B) to top panel
(A) using 2 M6 * 35MM Bolts (I). Use Wrench (L)
to install Bolts.
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 4
Attach Vertical Dividers (H) to Center Support
Rails on under side of top using 4 M6 * 30MM
Bolts (J). Use Wrench (L) to install Bolts.
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 5
Position Back Panel (D) in to grooves on Left Side
Panel (B) and in Back Rail on Top (A).
Align groove in Right Side Panel (C) with Back
Panel. Attach Right Side Panel (C) to top panel (A)
using 2 M6 * 35MM Bolts (I). Use Wrench (L) to
install Bolts.
Do not over tighten Bolts at this
time. Assemble Loose.
I
I
