STEP 5
Using one full packet of glue, fill the four bottom
holes (2 on each side) of the seat back (and as
labeled on the picture) using an equal amount of
glue in each hole. Leave the top two holes empty for
now. Make sure to spread the glue on the inside
walls of each hole with a fingertip or brush.
STEP 6
Insert the 4 side stretchers into 4 (2 on each side)
glue-filled holes on Seat Back.
STEP 7
Once side stretchers are in place, attach seat
assembly by inserting the back seat rail on the two
pins already installed on the rail of the back seat.
Apply glue
3 of 6
OCCK1050926
