IP-00031 Rev. B – 09/05 Page 2/2
2. Assemble antenna feed horn and attach to grid using
included hardware (see below).
Important Note: Feed horn must be orientated to grid
as shown for optimal antenna performance.
3. Attach Mounting Bracket to mast using included U-Bolts
and hardware. For up-tilt installations the tilt adjustment
arm should be on the bottom (as shown). For down-tilt
installations the tilt adjustment arm should on top.
4. Attach grid antenna to mounting bracket as shown.
Adjust antenna to desired tilt and lock into place using
nuts on the tilt adjustment arm.
Tilt Adjustment Arm
Mounting Bracket
Feed Horn
Installation Instructions
Model: HG918G
Assembled Grid Halves
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
