http://www.L
‐
com.com
33
z
Uninstall the driver software from your PC.
z
Restart your PC and repeat the hardware and software installation as
specified in this User Manual.
2.
I cannot communicate with other computers linked via Ethernet in the
Infrastructure configuration.
z
Make sure the power of the PC with Adapter associated is on.
z
Make sure that your Adapter is configured on the same channel and with
the same security options as with the other computers in the
Infrastructure configuration.
3. What should I do when the computer with the Adapter installed is
unable to connect to the wireless network and/or the Internet?
z
Check the LED indicators from the broadband modem, see if LED
indicating normal activity. If not, there may be problem with the
broadband connection.
z
Check the LED indicators on the wireless router or AP to see if they are
functioning properly. If not, check if the AC power and Ethernet cable are
firmly connected.
z
Check the IP address, subnet mask, gateway and DNS settings are
correctly entered for the network.
z
In Infrastructure mode, make sure the same Service Set Identifier (SSID)
is specified on the settings for the wireless clients and access points.
z
In Ad-Hoc mode, both wireless clients will need to have the same SSID.
Please note that it might be necessary to set up one client to establish a
BSS (Basic Service Set) and wait before setting up other clients. This
prevents several clients from trying to establish a BSS at the same time,
which can result in multiple singular BSSs being established, rather than
a single BSS with multiple clients associated to it.
z
Check if the Network Connection for the wireless client is configured
properly.
z
If Security is enabled, make sure the correct encryption keys are entered
on both the Adapter and the access point.
