L-Card E20-10, Руководство пользователя

Страница: 33 / 67

Data acquisition start
synchronization
Implemented
in version
E20-10
Notes
"external - slave on START
signal edge":
- without additional
conditions
- with additional start
conditions.
table 5-3 .
A, V
V Start on START signal
Stopping possible conditions -
table 5-5 .
"external – slave on START
signal fall":
- without additional
conditions
- with additional start
conditions.
table 5-3 .
A, V
V Start on START signal
Possible stopping conditions see in
table5-5 .
"on level" data acquisition
synchronization modes,
table
5-3 .
V On signal analog level in selected channel
Table 5-3. Capability to set additional permit conditions for ADC data recording in
buffer memory E20-10:
Additional conditions Implemented in
version E20-10
Notes
Blockage of given N number of frames recording
from the acquisition start
B
0 ≤
N
≤ 16777214,
where, N-integral
On bottomup transition through the given signal level
in selected channel and blockage of
N number of
frames recording from acquisition start
B
0 ≤
N
≤ 16777214,
where, N -integral
On top-down transition through the given signal level
in selected channel and blockage of
N number of
frames recording from acquisition start
B
0 ≤
N
≤ 16777214,
where, N -integral
Table 5-4. "On level" synchronization modes
"on level" acquisition modes
(acquisition start and stop is performed on signal
level)
Impleme
nted in
revision
E20-10
Notes
"on signal level above threshold of signal in 1 ADC channel" B Stopping will occur at
frame end edge
"on signal level above threshold of signal in 2 ADC channel" B
"on signal level above threshold of signal in 3 ADC channel" B
"on signal level above threshold of signal in 4 ADC channel" B
"on signal level below threshold of signal in 1 ADC channel" B
"on signal level below threshold of signal in 2 ADC channel" B
"on signal level below threshold of signal in 3 ADC channel" B
"on signal level below threshold of signal in 4 ADC channel" B