Oval Radiant Tube Heaters
www.lbwhite.com
Owner’s Manual • Oval Radiant Tube Heaters
14
FIG. 8
CONNECTION STRIPS:
• Insert a connection strip halfway
into the folded channel at both
sides of a reflector, at the end
without flanges.
• Slide this end of the reflector
through the hanger and push it
firmly into the folded channels of
the reflector at the burner box.
• The unflanged end of the reflector
will overlap the flanged end of the
adjacent reflector.
FLANGE
CONNECTOR STRIP
(DIMPLES UP)
Refer to Fig. 8 and the following instructions:
1. Slide the reflector through the hangers until it is
about 1 or 2 inches away from the burner box.
2. Using 4 U-clips, attach the end cap to the end of
this reflector. Push this reflector up to burner box.
Installing Reflectors & Supports
3. Connect the second reflector to the end of the
first reflector with the dimpled connector strips.
See Fig. 8 below.
4. Attach remaining end cap to last reflector with
4 U-clips.
REFLECTOR END VIEW
SHOWING FOLDED
CHANNEL
DOTTED LINES: INDICATE
CONNECTOR WITHIN FOLDED
CHANNEL
