Outdoor Installation Kit
www.lbwhite.com
Outdoor Installation Kit • AD250 & AW250
6
Section B: Preparing the Building for Heater Installation
Section C: Mounting the Heater and Completion
1.
Unfold the template provided in the kit.
2.
Use the template for determining the proper location of the heater with its mounting brackets,
and for cutting out the hole needed for the ducting.
3.
Read and comply with all installation instructions and information given on the template.
1.
After the duct hole has been cut, and stud locations identifi ed, center the wall brackets at
marks made on studs. Position the brackets so the holed mounting fl anges are pointing in
opposite directions. See Fig. 12. Temporarily attach the brackets with nails at upper holes.
See Fig. 13.
FIG. 12
FIG. 13
Centered
at studs
Flanges
pointed in
opposite
directions
Nail holes
